340
SKYROS Corporation VideoNet 8.4 User guide
If at selecting device from the list, you can see not all or none relay outputs
control buttons (maximum quantity of relay outputs for devices of Tiny and
Power families is 4, for devices of Titan family is 8), then most likely the reason
of that is in the device parameters setup. Namely, the device parameters setup
doesn’t provide manual controlling these relay outputs. Refer to system
administrator.
?
For correct relay outputs controlling, relay outputs controller must be physically in the
system and must be added in system configuration. Adding and configuring devices are
performed by system operator (refer to
3.1.2.2
section).
5. Click button with corresponding name to close needed
output
of controller.
If you want to open a controller output, release the button, corresponding to
this relay output.
If relay closing button of a selected controller is unavailable, most likely this
device doesn’t operate correctly or is absent. Refer to system administrator.
When closing/opening controller relay output there can occur closing/opening of a
door. Closing/opening controller relay can be performed both by system schedule
and by operator’s command.
Depending on
schedule
setup, relay closing/opening can be performed in
response to different alarm events, occurred in the system.
For example, if system schedule provides the following:
а
.
1) if notification from other system computers is received, it is necessary to
close a door (close relay output 2) for 10 minutes 15 seconds. In more detail
such system behaviour is described in an example of
3.7.3
section (refer to
Example 2
).
An operator can at any time in case of emergency situation to close/open relay
output manually; during that, there will be no response actions of the system.
To close device relay output:
1. Click
button on the
mode panel
.
2.
Relay outputs
section opens.
2. Click
button once more to select needed controller from the drop-down
list.
4.1.4. Controlling relay outputs
4. On the
mode panel
buttons of relay closing/opening for selected computer
will appear.
Содержание VideoNet
Страница 1: ...8 Version 8 4...
Страница 450: ...449 SKYROS Corporation VideoNet 8 4 User guide...
Страница 463: ...462 SKYROS Corporation VideoNet 8 4 User guide...
