Sirona Orthophos XG 3D/Ceph, Руководство по установке

Страница: 12 / 268

63 03 452 D3352
12 D3352
.
031.05.08
.
02 10.2015
2 Safety instructions Sirona Dental Systems GmbH
2.5 Qualifications of service personnel Installation Manual ORTHOPHOS XG 3D / Ceph
2.5
Qualifications of service personnel
Installation and startup may be carried out only by personnel specifically
authorized by Sirona.
2.6
Switching the unit on
Safety information for switching on the unit: Service engineer
Due to the risk of injury caused by malfunction, no person may be
positioned in the unit when it is switched on.
2.7
Radiation protection
Safety information for radiation protection: Service engineer
The valid radiation protection regulations and measures must be
observed. The statutory radiation protection equipment must be used.
During an exposure, the service engineer should move as far away from
the X-ray tube assembly as the coiled cable of the manual release
permits.
With the exception of the service engineer, no other persons are allowed
to stay in the room during an exposure.
In case of malfunctions, cancel the exposure immediately by letting go of
the exposure release button.
2.8 Laser light localizer
Safety information for light localizer: Service engineer
The system incorporates Class 1 laser products.
A minimum distance of 10 cm (4") is required between the eye and the
laser. Do not stare into the beam.
Do not use the system with any other lasers, and do not make any
changes to settings or processes that are not described in these
operating instructions. This may lead to a dangerous exposure to
radiation.
2.9
Modifications to the unit
Modifications to this unit which might affect the safety of the system
owner, patients or other persons are prohibited by law!
For reasons of product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user is responsible for any damage resulting from the use
of non-approved accessories.
2.10
Transport safety devices
Transport safety devices
IMPORTANT
The transport safety devices (marked in red) attached to the unit must
be removed prior to initial startup.