Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 378 / 552

06.03
10.5 Axes and spindles
10-378

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Axis-specific Signals from PLC to axis/spindle
31, ... 1.6 Position measuring system 2 A2
31, ... 1.5 Position measuring system 1 A2
31, ... 1.4 Follow-up mode A2
31, ... 1.3 Axis/spindle disable A2
31, ... 2.2 Spindle reset/delete distance-to-go A2
31, ... 2.1 Controller enabling command A2
31, ... 3.6 Velocity/spindle speed limiting A3
31, ... 16.7 Delete S value
31, ... 16.5 Resynchronize spindle 2
31, ... 16.4 Resynchronize spindle 1
31, ... 16.3 Gear switched
31, ... 16.2–16.0 Actual gear stages A to C
31, ... 17.6 Invert M3/M4
31, ... 17.5 Resynchronize spindle when positioning 2
31, ... 17.4 Resynchronize spindle when positioning 1
31, ... 18.7 Set direction of rotation CCW
31, ... 18.6 Set direction of rotation CCW
31, ... 18.5 Oscillation speed
31, ... 18.4 Oscillation by the PLC
31, ... 19.7–19.0 Spindle override H – A V1
Axis-specific Signals from axis/spindle to PLC
31, ... 60.7 Position reached with exact stop fine B1
31, ... 60.6 Position reached with exact stop coarse B1
31, ... 60.5 Referenced/synchronized 2 R1
31, ... 60.4 Referenced/synchronized 1 R1
31, ... 60.3 Encoder limit frequency exceeded 2 A3
31, ... 60.2 Encoder limit frequency exceeded 1 A3
31, ... 60.0 Axis/no spindle
31, ... 61.7 Current controller active A2
31, ... 61.6 Speed controller active A2
31, ... 61.5 Position controller active A2
31, ... 61.4 Axis/spindle stopped (n < n
min
) A2
31, ... 82.3 Switch gear
31, ... 82.2–82.0 Set gear stage A–C
31, ... 83.7 Actual direction of rotation CW
31, ... 83.5 Spindle within set range
31, ... 83.2 Set speed increased
31, ... 83.1 Set speed limited
31, ... 83.0 Speed limit exceeded
31, ... 84.7 Active spindle mode “Control mode”
31, ... 84.6 Active spindle mode “Oscillation mode”
31, ... 84.5 Active spindle mode “Positioning mode”
31, ... 84.3 Tapping without compensating chuck active
31, ... 86 and 87 M function for spindle
31, ... 88–91 S function for spindle
10 NC Start-Up with HMI Advanced