Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 507 / 552

06.03
16.2 Expanded message frame configuration (SW 2.2 and higher)
16-507

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
S
Configuring the additional drive actual values
The drive utilization for PDA11 is configured via the selection list of the cor-
responding parameter (PROFIDrive parameter P0916[x]) in Fig. 16-4.
File Edit Start-up Operation Diagnostics Tools Help
SimoCom U 12A drive
Online to drive 12A => data are modified directly in the drive!
Configurati
Analog in
Mechanic
Limits
Digital in
Digital out
Analog out
Monitoring
Controller
Traversing bl.
Shaft-angle
encoder int
PROFIBUS
Spindle posi
5 Torque reduction (TorRed)
6 Encoder 1 control word (G1_CTW)
7 No signal (NIL)
8 No signal (NIL)
9 No signal (NIL)
10 No signal (NIL)
11 No signal (NIL)
12 No signal (NIL)
13 No signal (NIL)
PROFIBUS OFF1 Control of clock-synchronized PROFIBUS
14 No signal (NIL)
15 No signal (NIL)
16 No signal (NIL)
5 Message word (MessW)
6
Encoder 1 status word (G1_STW)
7
Encoder 1 position actual value 1 (G1_XACT1)
8
Encoder 1 position actual value 1 (G1_XACT1)
9
Encoder 1 position actual value 2 (G1_XACT2)
10
Encoder 1 position actual value 2 (G1_XACT2)
14 No signal (NIL)
15 No signal (NIL)
16 No signal (NIL)
Currently selected block (CurrBlo)
Digital inputs (DIG_IN)
Load (Load)
Analog input T. 56.x/14 (ADC)
Analog input T. 24.x/20 (ADC)
Speed actual value A (NACT_A)
11
12
13
Fig. 16-4 Configuring the additional drive actual values
Before configuring the expanded message frames, you first need to perform the
standard configuration on the NC for the drive.
How to proceed with the standard configuration of a drive is described in Sec-
tion 10.5.3, page 10-313.
On the NC for the expanded message frame configuration, you only need to
activate PDA transfer in the respective system variable.
– Option: “Evaluation of internal drive variables”,
Order No.: 6FC5 251-0AB17-0BA0
– NC machine data for activating the data transfer in the system variables:
S
MD 36730: DRIVE_SIGNAL_TRACKING[n] (acquisition of additional
drive actual values)
Note
After configuring the expanded message frames, the standard message frame
with which the axis is driven is only explicitly visible in the NC machine data:
S
MD 13060: DRIVE_TELEGRAM_TYPE[n] (drive message frame type)
Step 3:
Configuring the
NC
Standard
configuration
Expanded
message frame
configuration
16 840Di Specific Data and Functions