Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 228 / 552

06.03
7.3 SIMATIC S7 project
7-228

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
In conjunction with SINUMERIK 840Di, the number of additional bits for fine
resolution should currently be set to the value 11. This corresponds to a pulse
multiplication of: 2
11
= 2048.
31
Overflows
0
current encoder
increments
Reserved bits for fine resolution:
Transferred encoder actual value G1_XIST1
10
Notice
S
Parameter “Additional substitute bits for fine resolution” must currently al-
ways be set to 11.
S
In accordance with the parameter “Additional substitute bits for fine resolu-
tion,
– MD30260: ABS_INC_RATIO (ratio of absolute resolution to incremental
resolution)
the value: 2
“Additional substitute bits for fine resolution”
= 2
11
= 2048 must be en-
tered in the machine data.
With parameter “611U conformant mode” is used for selection of the signal
source conformant with SIMODRIVE 611 universal for referencing the axis.
In 611U conformant mode, the signal source for referencing the axes (zero mark
or BERO) is no longer set in the standard message frame (encoder control word
G1_STW, page 7-226), but with the digital output word.
S
Digital output word, bits 8–11 (see O word, page 7-222)
Referencing the axis:
– Bit 8 = 0 –> axis 1 with zero mark of encoder 1 (X4–1)
– Bit 8 = 1 –> axis 1 with rising edge of BERO 1 (X6–2, Pin 2)
– Bit 9 = 0 –> axis 2 with zero mark of encoder 2 (X4–2)
– Bit 9 = 1 –> axis 2 with rising edge of BERO 2 (X6–2, Pin 3)
– Bit 10 = 0 –> axis 3 with zero mark of encoder 3 (X4–3)
– Bit 10 = 1 –> axis 3 with rising edge of BERO 3 (X6–2, Pin 4)
– Bit 11 = 0 –> axis 4 with zero mark of encoder 4 (X4–4)
– Bit 11 = 1 –> axis 4 with rising edge of BERO 4 (X6–2, Pin 5).
When you terminate the dialog box “DP slave properties” with the button: “OK”,
the data are transferred and the dialog box is closed. Step 1 of parameterization
of DP slave 611U is then complete.
611U conformant
mode
Step 1: End
7 PROFIBUS DP Communication