Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 222 / 552

06.03
7.3 SIMATIC S7 project
7-222

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The ADI4 DP slave is operated with the specific message frame type: Four axes
each with an encoder (standard message frame 3) and I/O data:
Message frame type Description
4 axes each with an encoder, standard mes-
sage frame 3 + IO, PDA-5/9 O/I 1/1 4 x standard message frame 3 and 1 PDA
word each for digital I/O data
PDA x/y number of process data words, x: Setpoint, y: Actual value
ADI4 message frame structure
STD 3
Axis1
Setpoints (master –> slave)
Axis4 Axis3 Axis2
STD 3 STD 3 STD 3 O word
I/O
STD 3: Standard message frame 3 acc. to PROFIDrive specification V3.0
O word: Digital output data (16 bits)
Actual values
(slave –> master)
I word: Digital input data (16 bits)
Low High
STD 3
Axis1 Axis4 Axis3 Axis2
STD 3 STD 3 STD 3 I word
I/O
Standard message frame 3: Speed setpoint interface 32 bits with 1 encoder
STW1
PDA1
Setpoint (master –> slave)
G1_STW STW2 NSOLL_B
PDA5 PDA4 PDA3 PDA2
ZSW1
PDA1
Actual value
(slave –> master)
G1_ZSW ZSW2 NIST_B
PDA5 PDA4 PDA3 PDA2
G1_XIST1
PDA7 PDA6
G1_XIST2
PDA8 PDA9
Low
High
O word (dig. output data 16 bits)
1)
15
Dig. output 1–4
–> X6–1: Pins 2–5
12 3 4 7 8 11 0
Dig. outputs 5–8 / direction signal
1–4 for unip. spindle
–> X6–1: Pins 6–9
not used
Zero mark / BERO as a reference
signal 1–4 in 611U conformant mode
Low byte High byte
I word (dig. input data 16 bits)
1)
7
Dig. input 1–4 / BERO 1–4
–> X6–2: Pins 2–5
2 11 12 13 1 8
Dig. inputs 5–6 / probes 1–2
–> X6–2: Pins 6–7
not used
Dig. inputs 9–10 / Drv_Rdy 3–4
–> X6–2: Pins 10–11
Low byte High byte
15 0 14
Dig. inputs 7–8 / Drv_Rdy 1–2
–> X6–2: Pins 8–9
1) Note:
To use the I/O words within the NC: See Section 10.6, page 10-379
Message frame
type
7 PROFIBUS DP Communication