Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 390 / 552

06.03
10.7 Loadable compile cycles (SW 2.2 and higher)
10-390

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
10.7.1 Loading compile cycles
The following requirements must be met to enable loading a compile cycle to
the NCK:
1. A flash file system (FFS) of at least 512KB is set up on the NCK.
MD18332: MM_FLASH_FILE_SYSTEM_MEM_SIZE (size of the FFS).
2. To transfer the compile cycle to the control, you need one of the following
transfer media:
– Floppy disk drive (option)
– Network connection via the Ethernet interface of the PCU with the exter-
nal PC/PG containing the compile cycles file.
3. To copy the compile cycle to the FFS of the NCK, you need SinuCom NC
Version 6.2.12 or higher.
Proceed as follows to transfer a compile cycle to the NCK:
1. Exit any active HMI Advanced windows and activate the NT desktop.
2. Use the Windows NT Explorer to copy the compile cycle file (e.g. ccresu.elf)
from the diskette drive or external PC/PG to a directory of your choice on the
PCU hard disk, e.g. F:\techfunctions.
3. Copy the compile cycle file with SinuCom NC from the directory used in
Step 2 on the PCU hard disk to the NCK FFS.
SinuCom NC menu command: File > Load compile cycle
NC flash file system – Loaded compile cycles
Name
Free memory space (bytes): ,431,015
Hard disk – Load compile cycle
Size Changed on
Delete
Load
Abort
Look in:
File name:
Files of type:
ccresu.elf
Compile cycles (*.elf)
ccclc.elf
cchslc.elf
ccclc.elf
80,985 7/30/02 10:38
techfunctions
Load compile cycle
ccresu.elf
Name Attribute Size Type Modified
79KB
80KB
64KB
7/30/02 10:38
7/30/02 10:38
7/30/02 10:38
A
A
A
Fig. 10-36 SinuCom NC: Load compile cycle
After copying the compile to the FFS, you need to reset the NCK. The com-
pile cycle is loaded in the NCK system software the time the NCK is booted.
Requirements:
Control
Transfer
10 NC Start-Up with HMI Advanced