Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 468 / 552

06.03
15.2 Software installation/update
15-468

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Windows 95
Any user name; if a password is required, type the password you have
specified to share access to the directories.
– For later verification, you may be prompted to confirm saving of the
password.
– Specify the drive letter under which the external drive is to be accessed
from the PCU (e.g. “H”).
– DIRECTORY TO BE MOUNTED:
Please type a name of the computer and the access name of the drive/
directory of the external computer:
\\<COMPUTER NAME>\<SHARED AS>
e.g. \\r3344\MY_INSTALL
How to set or determine the network parameters of an external computer
is described in Subsection 15.1.4 (page 15-458).
The set network information is now displayed on the PCU.
Connected network drive (last) H: (\\R3344\MY_INSTALL)
Install Directory F:\INSTALL
6. The default setting of the directory where the software is to be installed on
the external computer (Install Directory) is F:\INSTALL.
If the software is in a different directory, what is normally the case, this set-
ting must be adapted accordingly.
PLEASE SELECT:
1 Connect to Network Drive
2 Show Connected Network Drives
3 Disconnect form all Network Drives
4 Change Install Directory
5 Install from F:\INSTALL
9 Return to previous Menu
Your Choice [1,2,3,5,9] ?
To this aim, choose Change Install Directory using the key “4”.
In the input screen form that now appears, type the appropriate drive letter
(in the example: “H:”) and possibly any further path if the software is not
installed directly in the shared drive/directory (in the example:
R3344\MY_INSTALL), but in a subdirectory of MY_INSTALL.
Old Install Directory F:\INSTALL
New Install Directory H:\<PATH>
The complete network settings are displayed in the Service menu, and the
installation directory in the menu item Install from ..., (in the example:
H:<PATH>).
15 SW Installation/Update and Data Backup