Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 38 / 552

06.03
1.5 840Di start-up
1-38

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
When the control has been booted, the export version can be identified by the
additional character ’E’ in the Service screen of the NCU version.
S
HMI Advanced (option): Diagnostics operating area > Service displays >
Version > Version NCU
The identification of the control variation obtained by these measures is
important for service personnel and can also be helpful in providing evidence of
conformance for exports, in particular when making use of the negative
certificates that are provided for the export version.
1.5 840Di start-up
The user interface 840Di start-up included in the scope of supply of the SINUM-
ERIK 840Di is intended as a first introduction to the SINUMERIK 840Di function-
ality.
The user interface comprises the following functions:
S
Display of main screens
S
Display of alarms and messages
S
Management of parts programs
S
ASCII editor
S
NC, PLC and PROFIBUS diagnoses
S
Log Book.
The menu bar comprises the following menu commands:
S
File
S
Edit
S
Window
S
Display.
The functions that can be called using the menu commands File and Edit are
context-sensitive, i.e. in all cases, only the functions are offered which are pos-
sible, depending on the window currently active.
Example:
S
The parts program management window is selected. The menu command
Edit provides the following functions:
– Copy
– Insert
– Paste ...
– Load
– Unload.
S
The window for display of the axis actual values is selected. The menu com-
mand Edit provides no further functions.
Overview of
functions
Menu bar
Context-sensitive
menu functions
1 General on the SINUMERIK 840Di