Siemens SINUMERIK 840Di, Руководство пользователя

Страница: 275 / 552

06.03
10.2 Machine and setting data
10-275

Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
The setting data are divided into the following areas:
Table 10-2 Overview of setting data
Area Designation
from 41000 to 41999 General setting data ($SN_....)
from 42000 to 42999 Channel-specific setting data ($SC_....)
from 43000 to 43999 Axis-specific setting data ($SA_....)
For a detailed description of the machine or setting data, please refer to the de-
scription of the function that uses the machine data in question, e.g.:
References: /FB/ Description of Functions – Basic Machine
/FB/ Description of Functions – Extended Functions
/FB/ Description of Functions – Special Functions
A brief table of all machine and setting data is to be found in:
References: /LIS/ Lists
Machine and setting data.
Note
To search for information regarding machine and setting data, it is recom-
mended to use the search functions in the electronic documentation:
SINUMERIK DOConCD.
10.2.1 Display and input
To display and input machine data, appropriate screen forms are provided.
The screen forms are found on the HMI Advanced user interface at:
Area Switchover –> Start-up –> Machine Data.
Notice
To input machine data, at least the password of protection level 2 (default:
“EVENING”) must be set.
To facilitate the input of machine data in the bit format (HEX), a bit editor is pro-
vided.
If the input cursor is on a machine data in HEX format in the MD list, you can
call up the editor by pressing the toggle key (in the middle of the cursor keys).
Overview of
setting data
Data description
Machine data
screen forms
Bit editor
10 NC Start-Up with HMI Advanced