manualshive.com logo in svg

Renesas RX600 Series, Руководство пользователя

Серия продуктов Renesas RX600 предлагает пользовательские руководства бесплатно. Вы можете загрузить их с нашего сайта manualshive.com. Получите доступ к подробным инструкциям и руководствам по использованию продукта, чтобы оптимизировать его производительность и функциональность. Пользуйтесь бесплатными руководствами сейчас!

Поделиться
Скачать
background image

RX610 Group 

 

10. ICU 

R01UH0032EJ0120  Rev.1.20   

 

Page 247 of 1006 

Feb 20, 2013 

Notes: 1.  Single-operand transfer is transfer for a single operand per activation request. The IR flag in IRi is cleared 

by activation of transfer for the single operand. In nonstop transfer, one round of DMA transfer proceeds 
per activation request. The IR flag in IRi is cleared by activation of the DMA transfer. In 
consecutive-operand transfer, on the other hand, transfer for multiple operands per activation request is 
possible. The IR flag in IRi is cleared every operand transfer. If the source generates a further interrupt 
signal before transfer for all operands is complete, once the IR flag in IRi has been set to 1, it is cleared 
after transfer for individual operands. 

 

2.  In cases where the same interrupt source activates multiple channels of the DMAC, all specified channels 

are activated per activation request regardless of the form of DMA transfer. The IR flag in IRi is cleared 
every transfer on individual channels. If the source generates a further interrupt signal before transfer for 
all operands on all channels is complete, once the IR flag in IRi has been set to 1, it is cleared after transfer 
on individual channels. 

 

If the setting of the ISEL[1:0] bits in ISELRi is 11b, the interrupt control unit activates the DAMC and then automatically 
updates the ISEL[1:0] bits in ISELRi to 00b without waiting for the completion of data transfer. At this point, the IR flag 
in IRi is not cleared and the interrupt request is conveyed to the CPU. 

In cases where the ISEL[1:0] bits in ISELRi are to be re-set to 01b after having been updated to 00b, modify the value of 
the bits with the following timing. 

•

 

When the selected form of DMA transfer is single-operand transfer or nonstop transfer, modify the value of the bits 

within the corresponding interrupt exception handler. 

•

 

When the selected form of DMA transfer is consecutive-operand transfer, modify the value of the bits on completion 

of all DMA transfer on activated channels.

*1

 

•

 

When the same interrupt source is activating multiple channels, regardless of the type of DMA transfer, modify the 

value of the bits on completion of transfer on all channels.

*2

 

Furthermore, if re-activation of the DMAC is required, ensure that generation of the interrupt signal is possible after 
setting the ISEL[1:0] bits in ISELRi to 11b. 

 

Notes:  1. 

Single-operand transfer is transfer for a single operand per activation request. The ISEL[1:0] bits in 

ISELRi are automatically updated to 00b by activation of transfer for the single operand. In nonstop 

transfer, one round of DMA transfer proceeds per activation request. The ISEL[1:0] bits in ISELRi are 

automatically updated to 00b by activation of the DMA transfer. In consecutive-operand transfer, on the 

other hand, transfer for multiple operands per activation request is possible. The ISEL[1:0] bits in ISELRi 

are automatically updated to 00 every operand transfer. If the ISEL[1:0] bits in ISELRi are re-set to 11b 

before transfer for all operands is complete, the ISEL[1:0] bits in ISELRi are updated to 00b after transfer 

for individual operands. 

 

2. 

In cases where the same interrupt source activates multiple channels of the DMAC, all specified channels 

are activated per activation request regardless of the form of DMA transfer. The ISEL[1:0] bits in ISELRi 

are automatically updated to 00b after transfer on individual channels. If the ISEL[1:0] bits in ISELRi are 

re-set to 11b before transfer for all operands on all channels is complete, the ISEL[1:0] bits in ISELRi are 

updated to 00b after transfer on individual channels. 

 

Содержание RX600 Series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX600 Series

Lattice Semiconductor ECP5 Versa Quick Start Manual preview
ECP5 Versa
Бренд: Lattice Semiconductor Страницы: 15
Raritan DOMINION SX - Quick Setup Manual preview
DOMINION SX -
Бренд: Raritan Страницы: 4
Altera Nios II Hardware Development Manual preview
Nios II
Бренд: Altera Страницы: 42
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Бренд: AC&NC Страницы: 117
ZyXEL Communications POE-12 Specifications preview
POE-12
Бренд: ZyXEL Communications Страницы: 2
Microcomputer Systems MSI-P602 User Manual preview
MSI-P602
Бренд: Microcomputer Systems Страницы: 21
Ciara Horizon D10750 Disassembly Manual preview
Horizon D10750
Бренд: Ciara Страницы: 14
Rane CP 52S Operator'S Manual preview
CP 52S
Бренд: Rane Страницы: 6
Promise Technology Pegasus R4 Product Manual preview
Pegasus R4
Бренд: Promise Technology Страницы: 148
IceManCooler ICE-SKY-E User Manual preview
ICE-SKY-E
Бренд: IceManCooler Страницы: 2
NEC N8151-53 User Manual preview
N8151-53
Бренд: NEC Страницы: 114
Xilinx ML52 Series User Manual preview
ML52 Series
Бренд: Xilinx Страницы: 36
Enterasys DFE-256MB-UGK Installation Instructions preview
DFE-256MB-UGK
Бренд: Enterasys Страницы: 5
HighPoint NA381TB Quick Installation Manual preview
NA381TB
Бренд: HighPoint Страницы: 3
Hama 62732 Operating Instructions Manual preview
62732
Бренд: Hama Страницы: 34
Divio NRM 311 User Manual preview
NRM 311
Бренд: Divio Страницы: 78
Vecow SPC-3000 User Manual preview
SPC-3000
Бренд: Vecow Страницы: 146
Actisense W2K-1 Install And User Manual preview
W2K-1
Бренд: Actisense Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды