Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 168 / 504

Cross Track Error (XTE)
Cross Track Error (XTE) occurs when your vessel is steered or drifts off its
intended course. The distance between your intended course and your
actual position is the Cross track error (XTE).
The [Off track] alarm can be used to warn you if your vessel reaches a
specified distance from your intended course. The Off track alarm can be
configured from the Alarms manager:
[Homescreen > Alarms > Off track] .
When a cross track error exists you can either steer your vessel back on to its
intended course or you can use the
[Restart XTE] option to zero the XTE value
and use a new course from your current position as the intended course.
Select [Restart XTE] from the Navigation menu: [Menu > Navigation > Restart
XTE] to restart your XTE..
Navigating to a waypoint or point of interest (manual
steering)
You can navigate to a waypoint or a point of interest by performing a [Goto] .
When performing a [Goto] active navigation will commence which guides
you to a selected destination.
Follow the steps below to perform a [Goto] using manual steering:
1. Select and hold on the waypoint or point of interest and select [Goto]
from the context menu.
2. Manually navigate to the selected destination.
3. The waypoint arrival alarm will trigger when your vessel reaches the
waypoint arrival radius.
The Waypoint arrival radius can be set from the Alarms manager:
[Homescreen > Alarms > Settings > Arrival radius].
If the Waypoint arrival alarm is disabled then no notification will be
triggered.
4. Select [OK] on the waypoint arrival notification.
5. Select the [Stop Nav] onscreen icon located at the top of the screen or
select [Stop] from the context menu or [Navigation] menu to end active
navigation.
You can also navigate to a waypoint from the [Go] menu: [Menu > Go >
Waypoint] or you can navigate to a specified latitude and longitude from the
[Go] menu: [Menu > Go > Lat/long] .
You can end active navigation at any time by selecting the [Stop Nav]
onscreen icon located at the top of the screen or selecting [Stop] from the
context menu or [Navigation] menu.
For more information on waypoints and waypoint management refer to: 9.1
Waypoints
168