Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 341 / 504

The data items on the single data and bidata pages can be customized.
22.12 Generators page
When the display detects generators which transmit supported NMEA 2000
PGNs, a pre-configured generator page will be available in the Dashboard
app.
Typically, a generator is connected to the display’s SeaTalkng ®/NMEA 2000
network via the generator manufacturer’s NMEA 2000 interface/gateway. If a
gateway is used, ensure that it’s running an appropriate software version —
refer to the generator manufacturer.
The generator page displays data for the first 2 detected generators. For the
display of data for more than 2 generators, a digital switching solution is
recommended.
For information on compatible interfaces, refer to your generator’s
manufacturer.
Details of detected generators are available in the Generator configuration
page. For details, refer to:
p.98 — Generator configuration
Example page for single generator
The example provided below shows data provided by a Fischer Panada
generator, connected to the display’s SeaTalkng ®/NMEA 2000 network via
a Fischer Panada
Communication Interface FP-CAN to NMEA 2000 , ( Part
number: 0031409 ), running gateway software version 2v11 or later .
1. Example generator page for DC generator.
2. Example generator output data for a 3 phase AC generator.
The pre-configured generator page contains the following data items:
• Generator state (PGN 127514)
• Engine hours (PGN 127489)
• Alternator voltage (PGN 127489)
• Coolant temperature (PGN 127489)
• Exhaust gas temperature (PGN 130316)
• Oil pressure state (PGN 127489)
DC generators also include the following data items:
• Output voltage (PGN 127751)
• Output current (PGN 127571)
AC generators include the following data items for up to 3 phases:
• Output voltage (PGN 127747, PGN 127748, PGN 127749)
Dashboard app
341