Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 322 / 504

Example importing waypoints
From the [Import/export] menu: [Homescreen > My data > Import/export] :
1. Select either [Import waypoints via N2K] or [Import Routes via N2K] .
2. Select the device from the list that has the waypoints or routes that you
want to import.
Important:
If there is only 1 compatible device connected then this step will be skipped.
A list of Waypoints or Routes on the selected device will be displayed.
3. Select each waypoint or route that you want to import, or select [Select all] .
4. Select [Import] .
5. Select [OK] on the import confirmation dialog.
The selected waypoints or routes will now be available on the MFD.
Importing waypoints or routes over NMEA 0183
This procedure details importing waypoint or routes to an MFD running either
the LightHouse 3 or LightHouse 4 operating system from an MFD running the
First responder version of the LightHouse 2 operating system.
Note:
It may be possible to import waypoints and routes from other NMEA
0183 devices following a similar procedure, refer to the instructions
that accompanied the NMEA 0183 device and use them in place of the
LightHouse 2 steps below.
Note:
LightHouse 3 and LightHouse 4 MFDs allow more than 1 waypoint or route
to have the same name. It is recommended that you check and rename
waypoints or routes that have the same name as existing waypoints and
routes before importing.
1. Ensure that an NMEA 0183 input port on the receiving MFD is correctly
connected to an NMEA 0183 output port on the LightHouse 2 First
responder MFD.
Example NMEA 0183 connection
1. Receiving MFD (e.g.: Axiom Pro running LightHouse 3 / LightHouse 4 )
2. LightHouse 2 MFD (e.g.: eS series)
3. Example connection Port 1, positive input (White) to Port 1, positive
output (Yellow)
322