Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 124 / 504

8.3 Pilot sidebar
Depending on the state of your autopilot the following information and
controls are available on the Pilot sidebar.
Note: The Pilot sidebar is controlled using the Touchscreen.
Pilot sidebar — Standby
1 [Sidebar selection]
Enables you to switch between Pilot and Data sidebars.
2 [Close]
Closes the Pilot sidebar.
3 [Steer to Hdg]
Enables you to engage the autopilot in locked heading (Auto)
mode.
4
[Steer to Nav]
Enables you to engage the autopilot in Navigation (Track) mode.
5 [Pilot status]
Provides the status of the autopilot.
6 [Rudder bar]
Provides visual indication of rudder position.
7 [Heading]
Displays your autopilot’s current locked heading.
Selecting displays the Locked Heading adjustment pop-over.
8 [–1
°
]
Selecting will adjust your locked heading by minus 1 degree.
9 [+1
°
]
Selecting will adjust your locked heading by plus 1 degree.
10 [–10
°
]
Selecting will adjust your locked heading by minus 10 degrees.
11 [+10
°
]
Selecting will adjust your locked heading by plus 10 degrees.
12 [Disengage]
Selecting will disengage your autopilot.
13 [Steer to Nav]
Selecting will engage your autopilot in Navigation mode.
14 [Pilot state]
Displays the current state / mode of your autopilot.
15 [Destination]
Displays your current destination.
16 [User customizable data]
Displays user customizable data.
Select to customize data.
17
[Advance wpt]
Selecting will advance your destination to the next waypoint in
the current route.
18 [Stop Route] / [Stop Goto]
Selecting will stop current navigation.
19 [Restart here]
Selecting will restart the cross track error (XTE) at your current
location.
20 [Disengage]
Selecting will disengage your autopilot.
21 [Steer to Hdg]
Selecting will switch your autopilot to Locked heading mode.
22 [Pilot state]
Displays the current state / mode of your autopilot.
124