PARAMOUNT BED 7B01001000A3 Скачать руководство пользователя

Страница: 1 / 120

INSTRUCTION MANUAL

A6 Series

Electrical Hospital Bed

7B01001000A3

Preface

Thank you for purchasing the A6 Series Bed (“bed”).

This instruction manual describes precautions and how to safely use and operate the bed.

To ensure safe and proper use of the bed, be sure to read this instruction manual before use.

The safe and correct operating procedures should be explained not only to the patient using the bed

for medical treatment but also to the patient’s attendant.

After reading this instruction manual, store it in a place that can be easily accessed for later reference.

Users and/or patients are requested to report information about any serious incident that occurs within the EU to
the regulating authority of the member country of residence.

Serious incident means any incident that directly or indirectly resulted in, may have resulted in, or may result in
any of the following.

• Death of a patient, user, or other person

• Serious temporary or permanent adverse effects on the health of a patient, user, or other person

• Serious public health threat

* An optional mattress is attached in the illustration.

PARAMOUNT BED CO., LTD.

[Revised: November 2021]

Содержание 7B01001000A3

























































































































Результаты поиска

Содержание 7B01001000A3

Отзывы:

Похожие инструкции для 7B01001000A3

Бренды по названию

Популярные бренды

PARAMOUNT BED 7B01001000A3, Руководство оператора

Результаты поиска

Содержание 7B01001000A3

Отзывы:

Похожие инструкции для 7B01001000A3

Бренды по названию

Популярные бренды