Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 307 / 504

Responder setup
The Responder menu tab is only available when [First responder] is selected
as the ‘Boating activity’ during step 2 of the MFD’s initial startup wizard. The
Responder menu includes settings for STEDS specific features, which require
an AIS5000 to be connected to the system.
Vessel details
• [Responder vessel type] — Select your responder vessel type from a list.
• [Boat name] — Enter your vessel name (this option is also available in the
Boat details menu).
MMSI / AIS
• [MMSI] — Set your vessel’s MMSI number.
Important:
– In the United States of America (USA), the MMSI and Static Data
must be entered only by a Raymarine® dealer or other appropriately
qualified installer of marine communications equipment for marine
vessels. In the USA, the user is NOT authorized to do this.
– In Europe and other parts of the world outside of the United States of
America, the MMSI can be set up by the user.
– For further details, refer to the relevant Telecommunications
Regulatory Body for your region.
• [AIS mode] — Determines the transmit/receive mode of STEDS AIS
hardware. For details see: p.316 — First responder AIS modes
STEDS passphrase
• [Passphrase] — Enter the designated passphrase your team / organization
is using to transmit and receive STEDS messages.
• [Clear passphrase] — Deletes the entered passphrase.
• [Passphrase auto-wipe] — Passphrase expiry. Set the number of days
before the passphrase is automatically deleted (the passphrase will be
wiped at 00:00 UTC).
Data logging
• [Data logging] — Enables and disables Data logging.
• [Logging interval] — Time interval between recording data.
• [Save to:] — Select the card slot to use for Data logging.
Password protection
• [Activate password lock] / [Deactivate password lock] — When activated
critical settings cannot be changed without entering the specified
password.
Advanced
• [Advanced set-up] — Configure OneShot TOI settings and STEDS
messaging transmission FIDs and checksums.
– For details on OneShot TOI settings see: p.314 — TOI OneShot settings
– For details on FIDs and checksums see:
STEDS messaging transmission FIDs and checksums
STEDS messaging transmission FIDs and checksums
The SITREP and Static data functional IDs (FIDs) and FID checksum
validation can be enabled and disabled from the
[Advanced set-up] menu.
[Homescreen > Settings > Responder > Advanced set-up > Configure]
STEDS messages
The following transmission SITREP and Static data FIDs are available:
• Tx FID 10 (SITREP)
• Tx FID 11 (Static data)
• Tx FID 56 (Legacy SITREP)
• Tx FID 57 (Legacy static data)
Note:
FID 10 and FID 11 are enabled by default. FID 56 and FID 57 are disabled by
default.
Checksum validation
Checksum validation is enabled by default but can be enabled and disabled
from the
[Transmission checksums] menu: [Homescreen > Settings >
Responder > Advanced set-up > Configure > Transmission checksums] .
When enabled received FID’s checksums are checked to validate messages.
Checksum validation is available for the following FIDs:
• FID 3— PI message acknowledgement
• FID 4 — Target of interest — 15s
First responder
307