Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 382 / 504

ClearCruise™ tab (Object Detection) / (Video Analytics)
Settings (ClearCruise™ tab — Object Detection /
Video Analytics) Options
[Highlight detected objects]
Uses proprietary ClearCruise™ technology to
highlight and track objects detected in the water.
• Disable
• Enable
[Beep on detection]
When enabled, the MFD will audibly beep when an
object is detected.
• Disable
• Enable
[Display estimated range]
When enabled, the MFD will display an estimated
range for highlighted objects (objects must be
closer than 300 ft).
• Disable
• Enable
[Detection threshold]
Enables you to change the object detection
sensitivity.
• 1 to 16
Camera motion tab
Settings Options
[Camera height above the waterline]
To ensure correct alignment of the camera for
tracking purposes the height the camera has been
installed at, above the waterline, must be set.
• 0ft to 99ft
[Set forward position]
Adjust the Forward position of your camera
Displays the forward
alignment picture
[Man overboard]
Enables and disables automatic tracking of a MOB
alarm.
The most recent target is tracked.
• Disable
• Enable
Settings Options
[Dangerous AIS targets]
Enables and disables automatic tracking of
Dangerous AIS targets.
The most recent target is tracked.
• Disable
• Enable
[Dangerous MARPA targets]
Enables and disables automatic tracking of
Dangerous Radar targets.
The most recent target is tracked.
• Disable
• Enable
[Vertical stabilization]
Minimizes the effects of vessel pitch (while used in
a forward or reverse facing position) and vessel roll
(while used in a port or starboard facing position).
• Disable
• Enable
[Horizontal stabilization]
Minimizes the effects of vessel pitch (while used in
a forward or reverse facing position) and vessel roll
(while used in a port or starboard facing position).
*Horizontal stabilization is intended to keep the
camera pointed in a fixed heading, even as the
vessel turns.
Note:
Horizontal stabilization is not a form of target
tracking. It is best used to reduce the effects
of subtle heading changes when running in a
fixed direction. Whenever the vessel makes a
notable course change, the camera will need
to be manually adjusted to align with the new
heading
• Disable
• Enable
[Enable scan]
Enables and disables Surveillance mode.
Surveillance mode pans the camera left to right
continuously to the specified speed
• Disable
• Enable
382