1xEV-DO Measurements
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
414
User Manual 1173.9511.02 ─ 11
{<2_SegReliability>
0 | 3 | 4 | 8
The segment reliability indicates whether one of the following
exceptions occurred in this segment:
0:
No error
3:
Signal overflow
4:
Signal low
8:
Synchronization error
If a combination of exceptions occurs, the most severe error is
indicated.
<3_OBW>
Occupied bandwidth
Range:
0 to 16 MHz (SDEViation 0 to 8 MHz)
Default unit: MHz
<4_LowerEdge>,
<5_UpperEdge>}
Lower and upper edge of the selected carrier's or carrier group's
occupied bandwidth.
For single-carrier configurations the lower and upper edges are
returned as frequency offsets w.r.t. the carrier's center fre-
quency. For multi-carrier configurations absolute frequency val-
ues are returned.
Range:
- 16 to 6000 MHz
Default unit: MHz
Example:
See
Performing Single-Shot Measurements
Usage:
Query only
Firmware/Software:
V2.0.20
Options:
R&S CMW-KM012
For additional information concerning syntax elements and returned values refer to
Conventions and General Information
.
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:OBW:AVERage?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:OBW:MAXimum?
CALCulate:EVDO:MEAS<i>:MEValuation:LIST:OBW:SDEViation?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW:AVERage?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW:MAXimum?
FETCh:EVDO:MEAS<i>:MEValuation:LIST:OBW:SDEViation?
Returns Occupied Bandwidth (OBW) results in list mode.
To define the statistical length for
AVERage
,
MAXimum
and calculation and enable the
calculation of the results use the command
. The ranges indicated below
apply to all results except standard deviation results. The minimum for standard devia-
tion results equals 0. The maximum equals the width of the indicated range divided by
two. Exceptions are explicitly stated.
The values listed below in curly brackets {} are returned for each active segment:
{...}
seg 1
, {...}
seg 2
, ..., {...}
seg n
. The number of active segments n is determined by
.
Command Reference
深圳德标仪器
135-1095-0799
