Omron SYSDRIVE MX2 SERIES, Руководство пользователя

Страница: 514 / 620

9 Overview of DriveProgramming
9 - 2 Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
9-1 Overview of DriveProgramming
The 3G3MX2-V1 Series Inverter has the built-in simple sequence function (DriveProgramming), which
enables a stand-alone inverter to perform simple sequence control.
You can create programs easily by using the CX-Drive. The user programs you created can be down-
loaded onto the inverter for programmed inverter operation.
• The DriveProgramming supports both flowchart and text language method programming.
• Five tasks can be processed in parallel.
• User programs can be executed externally by the ON/OFF signal input via a multi-function input terminal.
• The user programs can be used to read and write functions allocated to the multi-function input and
output terminals.
• The Digital Operator enables you to change the settings of the output frequency, acceleration/decel-
eration time, and other parameters that require on-site adjustment by specifying the user parameters
(P100 to P131), without connecting any computer.
• Because user programs are stored in the internal EEPROM of the inverter, you can start a program
immediately after the inverter power supply is turned on.
Precautions for Safe Use
If the DriveProgramming stops during multi-function output, the output status is held. Take
safety precautions such as stopping peripheral devices.
Precautions for Correct Use
The 3G3MX2-V1 Series Inverter does not support the optional LCD Digital Operator (Model:
3G3AX-OP05). Therefore, the clock command built into the LCD Digital Operator cannot be used.
The details of the main DriveProgramming function are as follows.
Features of DriveProgramming
DriveProgramming Function
Item Specifications
Program
specifications
Programming language Flowchart and text language method
Input device
Windows computer
(The supported operating systems are Windows XP SP3, Win-
dows Vista, and Windows 7.)
Program capacity
1024 steps max.: 6 KB
(1024 steps max. for a total of 5 tasks)
Programming support
function
Functions supported in Inverter/Servo support tool CX-Drive
• Program editing and display
• Program compilation (Program configuration check)
• Program downloading, uploading, and all clear
Execution format
• Execution by interpreter
• Execution cycle: 2 ms/step (5 commands executable through
5-task parallel processing)
• Subroutine call supported (Nesting in 8 levels max.)