MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 144 / 324

3-14
OPERATING YOUR VEHICLE
68PH0-74E
Restarting diesel engine after fuel-
empty stop
If the engine stops and the low fuel warn-
ing light and the malfunction indicator light
come on, use the following procedure:
1) Fill the fuel tank.
2) Press the engine switch to change the
ignition mode to “ON” for 5-10 seconds
to feed fuel.
3) Perform above engine starting proce-
dure to start the engine.
If the malfunction indicator light still comes
on after the engine started, there may be
some problem with the engine. Ask your
authorised Maruti Suzuki workshop to
have the engine inspected.
If the master warning indicator light
blinks and the engine cannot be started
Your keyless push start system remote
controller may not be sensed as being
within the “interior workable area”. Try
again after making sure that you have the
remote controller with you. If the engine
still cannot be started, the battery of the
remote controller may be discharged. You
must then use the following method to be
able to start the engine.
68PH00304
1) Make sure the parking brake is set fully.
2) Shift to “N” (Neutral) and fully depress
the clutch pedal. Hold the clutch and
brake pedals fully depressed.
3) The “PUSH START SWITCH” message
will appear on the information display in
the instrument cluster. Press the engine
switch (1).
4) Within about 10 seconds of blinking of
the master warning indicator light in the
instrument cluster, touch the engine
switch with the “LOCK” button end of
the remote controller (2) for about 2
seconds.Then you should be able to
select ignition modes & start the
engine.
NOTE:
• If you still cannot start the engine after
several attempts using the above
method, there may be a problem else-
where, such as a low battery. Contact
your authorised Maruti Suzuki workshop
for inspection.
• The immobilizer/keyless push start sys-
tem warning light will come on for about
5 seconds while the master warning indi-
cator light is blinking. In addition, the
information display will show a certain
message during this time. Refer to
“Information Display” in the “BEFORE
DRIVING” section for details.
• You may customize the system to cause
the interior buzzer to sound once for the
“remote controller out of sensing range”
warning. Please contact an authorised
Maruti Suzuki workshop for the customi-
zation.
• If the battery of the remote controller is
about to be completely discharged, a
message warning will appear on the
information display when the ignition
mode is changed to “ON” by pressing
the engine switch. For details on replac-
ing the battery, refer to the “Keyless
Push Start System Remote Controller” in
the “BEFORE DRIVING” section.
Returning the ignition mode to
“LOCK” (OFF)
NOTE:
Certain problems like a fault in engine sys-
tem may prevent the engine switch from
going back to the “LOCK” (OFF) mode. If
this happens, have the vehicle inspected
by an authorised Maruti Suzuki workshop
after doing the following:
• Lock the doors using the key to prevent
theft. (The request switches and the key-
(1)
(2)
EXAMPLE