MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 30

Страница: 30 / 324

2-12

BEFORE DRIVING

68PH0-74E

NOTE:

Used batteries must be disposed properly

according to applicable rules or regulations

and must not be disposed with ordinary

household trash.

Keyless Entry System Transmitter

(Type B)

68PH00215

(1) “LOCK” button

(2) “UNLOCK” button

You can lock or unlock all doors (including

the tailgate) simultaneously by operating

the transmitter near the vehicle.

Central door locking system

• To lock all doors, push the “LOCK” but-

ton (1) once.

• To unlock only the driver’s door, push the

“UNLOCK” button (2) once.

• To unlock other doors, push the

“UNLOCK” button (2) once again.

NOTE:

You can switch the function that unlocks all

doors from twice operations to once opera-

tion, and vice versa, via the setting mode

of the information display. For details on

how to use the information display, refer to

“Information Display” in this section.

The turn signal lights will flash once and

the siren will sound once when the doors

are locked.
When the doors are unlocked:

• The turn signal lights will flash twice and

the siren will sound twice.

• If the interior light switch is in the

“DOOR” position, the interior light will

turn on for about 15 seconds and then

fade out. If you insert the key into the

ignition switch during this time, the light

will start to fade out immediately.

Be sure the doors are locked after you

operate the “LOCK” button (1). If no door is

opened within about 30 seconds after the

“UNLOCK” button (2) is operated, the

doors will automatically lock again.

WARNING

Swallowing a lithium battery may

cause serious internal injury. Do not

allow anyone to swallow a lithium

battery. Keep lithium batteries away

from children and pets. If swallowed,

contact a physician immediately.

NOTICE

The remote controller is a sensitive

electronic instrument. To avoid dam-

aging it, do not expose it to dust or

moisture or tamper with internal parts.

(1)

(2)

EXAMPLE

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды