MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 116

Страница: 116 / 324

2-98

BEFORE DRIVING

68PH0-74E

Low Fuel Warning Light

54G343

If this light comes on, fill the fuel tank

immediately.
When this light comes on, a ding sounds

once to remind you to fill the fuel.

If you do not fill the fuel, a ding sounds

every time when the ignition switch is

turned to the “ON” position or the engine

switch is pressed to change the ignition

mode to “ON”.

NOTE:

The activation point of this light varies

depending on road conditions (For exam-

ple, slope or curve) and driving conditions

because of fuel moving in the tank.

Electric Power Steering Light

79J039

This light comes on when the ignition

switch is turned to the “ON” position or the

engine switch is pressed to change the

ignition mode to “ON”, and goes out when

the engine is started.
If this light comes on while driving, the

power steering system may not work prop-

erly. Have the system inspected by your

authorised Maruti Suzuki workshop.

NOTE:

Following operations of the steering wheel

while parking or driving at a very low-

speed may have steering effort bigger

gradually. This is not a malfunction of the

steering system, but the power steering

control system limits the power assist in

order to prevent them from overheating.

• The steering wheel is operated very

often.

• The steering wheel is kept in a fully

turned position for a long while.

When the power steering control system

cool down, the power steering system

back to the original condition.

However, repeating these operations could

cause the power steering system dam-

aged.

NOTE:

If the power steering system does not work

properly, you will feel heavier to steer but

you still will be able to steer.

NOTE:

If the steering is operated, you may hear

noise. This is normal and indicates that the

power steering system works properly.

Engine coolant temperature light

(If equipped)

68PH00274

When the ignition switch is turned to the

“ON” position, this light comes on briefly so

you can check that the light is working.
This indicator has two following functions.

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды