MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 139

Страница: 139 / 324

3-9

OPERATING YOUR VEHICLE

68PH0-74E

–The remote controller is in stowage like

the glove box or a door pocket.

–The remote controller is in the sun visor

pocket or on the floor.

• Even when the remote controller is out-

side the “interior workable area”, if it is in

any of the following conditions, you may

be able to start the engine or select the

ignition mode. The “remote controller

outside” warning may not be given at

that time.

–The remote controller is outside the

vehicle but very close to a door.

–The remote controller is on the instru-

ment panel.

Parking Brake Lever

68PHM3001

(1) To set

(2) To release

(3) To release

The parking brake lever is located between

the seats. To set the parking brake, hold

the brake pedal down and pull the parking

brake lever all the way up. To release the

parking brake, hold the brake pedal down,

pull up slightly on the parking brake lever,

push the button on the end of the lever

with your thumb, and lower the lever to its

original position.
For CVT vehicles, always set the parking

brake before moving the gearshift lever to

the “P” (Park) position. If you park on an

incline and shift into “P” before setting the

parking brake, the weight of the vehicle

may make it difficult to shift out of “P” when

you are ready to drive the vehicle.
When preparing to drive the vehicle, move

the gearshift lever out of the “P” position

before releasing the parking brake.

(1)

(2)

(3)

EXAMPLE

WARNING

• Never drive your vehicle with the

parking brake on: rear brake effec-

tiveness can be reduced from over-

heating, brake life may be

shortened, or permanent brake

damage may result.

• If the parking brake does not hold

the vehicle securely or does not

fully release, have your vehicle

inspected immediately by autho-

rised Maruti Suzuki workshop.

WARNING

Always set the parking brake fully

before leaving your vehicle or it may

move, causing injury or damage.

When parking, make sure the gear-

shift lever for manual transaxle vehi-

cles is in reverse or first gear and the

gearshift lever for CVT vehicles is in

“P” (Park). Remember, even though

the transaxle is in gear or in Park,

you must set the parking brake fully.

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды