MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 134

Страница: 134 / 324

3-4

OPERATING YOUR VEHICLE

68PH0-74E

To release the steering lock, insert the key

and turn it clockwise to one of the other

positions. If you have trouble turning the

key to unlock the steering, try turning the

steering wheel slightly to the right or left

while turning the key.

ACC

Accessories such as the radio can oper-

ate, but the engine is off.

This is the normal operating position. All

electrical systems are on.

START

This is the position for starting the engine

using the starter motor. The key should be

released from this position as soon as the

engine starts.

Ignition key reminder (If equipped)

A buzzer sounds intermittently to remind

you to remove the ignition key if it is in the

ignition switch when the driver’s door is

opened.

81A297S

WARNING

• Never return the ignition switch to

the “LOCK” position and remove

the ignition key while the vehicle is

moving. The steering wheel will

lock and you will not be able to

steer the vehicle.

(Continued)

EXAMPLE

WARNING

(Continued)

• Always return the ignition switch to

the “LOCK” position and remove

the ignition key when leaving the

vehicle even if only for a short time.

Also do not leave children alone in

a parked vehicle. Unattended chil-

dren could cause accidental move-

ment of the vehicle or could tamper

with power windows. They also

could suffer from heat stroke in

warm or hot weather. These could

result in severe injury or even

death.

NOTICE

• Do not use the starter motor for

more than 12 seconds at a time. If

the engine does not start, wait 15

seconds before trying again. If the

engine does not start after several

attempts, check the fuel and igni-

tion systems or consult your autho-

rised Maruti Suzuki workshop.

• Do not leave the ignition switch in

the “ON” position if the engine is

not running as the battery will dis-

charge.

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды