MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 122 / 324

2-104
BEFORE DRIVING
68PH0-74E
NOTE:
The light sensor reacts even to infrared
rays, so it may operate incorrectly when
there are strong infrared rays.
Light Reminder Buzzer
The interior buzzer continuously beeps if
you open the driver’s door without turning
off the headlights and position lights. This
function is triggered under the following
condition:
The headlights and/or position lights are
on even after the ignition switch is turned
off, or the engine switch is pressed to
change the ignition mode to “LOCK”
(OFF).
The buzzer stops sounding when you turn
off the headlights and position lights.
NOTE:
A message is indicated on the information
display in the instrument cluster while the
buzzer is sounding.
Daytime Running Light (D.R.L.)
System (If equipped)
When the engine is started, this system
turns on the daytime running lights.
Conditions for D.R.L. system operation
1) The engine is running.
2) Headlights and front fog light (If
equipped) are off.
NOTE:
Brightness of the daytime running lights is
different from the brightness of the position
lights, but it is not a malfunction.
Guide Me Light (Vehicle with auto-
matic lights operation)
Follow me home function
This function turns on the front position
lights and the headlights in the low beam
setting for about 10, 15, 20, 25 or 30 sec-
onds after the engine switch is pressed to
change the ignition mode to “LOCK”
(OFF).
To set the function:
1) Turn the lighting switch to the “AUTO”
position
2) Press the engine switch to change the
ignition mode to “LOCK” (OFF).
3) Pull the lighting control lever toward
you once and open the driver’s side
door within 60 seconds. Or pull the
lighting control lever toward you once
while the driver’s side door is open.
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than the “AUTO” position.
NOTE:
• When the “follow me home” is function-
ing, the front fog lights and the head-
lights (High beam) are not turned on.
• Lighting time of the “follow me home
function” can be changed on the infor-
WARNING
It takes about 5 seconds for the light
sensor to react to a change in light-
ing conditions. To help avoid an acci-
dent due to reduced visibility, turn on
your headlights before driving into a
tunnel, parking structure or the like.