MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 138 / 324

3-8
OPERATING YOUR VEHICLE
68PH0-74E
68PH02305
(1) Immobilizer/keyless push start sys-
tem warning light (Blinks)
(2) Master warning indicator light (Blinks)
NOTE:
• If the warning is given, locate the remote
controller as soon as possible.
• Any attempt to start the engine will fail
while the warning is active. The mes-
sage appearing on the information dis-
play in the instrument cluster will also
indicate this condition. Refer to “Informa-
tion Display” in the “BEFORE DRIVING”
section for details.
• Normally the immobilizer/keyless push
start system warning light should go out
and the master warning indicator light
should stop blinking shortly after the
remote controller is brought back inside
the vehicle. If they remain lit and blink-
ing, change the ignition mode to “LOCK”
(OFF) by pressing the engine switch and
then perform the engine starting opera-
tion Refer to “Starting the Engine” in this
section.
• Always keep the remote controller with
you as the driver.
Interior Workable Area for Engine
Starting, Ignition Mode Selection
and “Remote Controller Outside”
Warning
68PH00306
(1) Interior workable area
The “interior workable area” for these func-
tions is defined as all the interior spaces
except for the space above the instrument
panel.
NOTE:
• Even when the remote controller is in the
“interior workable area”, if it is in any of
the following conditions, you may not be
able to start the engine or select the igni-
tion modes, and the “remote controller
outside” warning may be given.
–The remote controller’s battery is low.
–The remote controller is affected by
strong radio signals or noise.
–The remote controller is in contact with
or covered by a metallic object.
(1)
(2)
(1)
(2)
EXAMPLE
(1)
EXAMPLE