MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 147

Страница: 147 / 324

3-17

OPERATING YOUR VEHICLE

68PH0-74E

68PH00312

(2) Sport mode indicator

S (Sport) mode switch

The sport mode switch (1) is used to turn

on and off the sport mode.

To turn on the sport mode, push in the

switch and sport mode indicator (2) will

appear on the information display. To turn

off the sport mode, push in the switch

again and sport mode indicator will go off.

When the engine restarts, the sport mode

is turned to the off automatically.
The sport mode is suitable for the following

driving conditions:

• Driving on hilly, winding roads

– You can drive more smoothly with less

frequent gear changing

• Going down a steep hill

– Some engine braking is provided

Gearshift lever

68PH00313

(1) Knob button

The gearshift lever is designed so that it

cannot be shifted out of the “P” position

unless the ignition switch is in the “ON”

position and the brake pedal is depressed.

The gearshift lever has a lock mechanism

to help prevent accidental shifting. To shift

the gearshift lever:

NOTE:

• Always shift the gearshift lever without

pushing in the knob button (1) except

when you shift from “P” to “R”, from “D”

to “L”, from “N” to “R” or from “R” to “P”. If

you always push in the knob button (1)

when shifting the gearshift lever, you

could shift into “P”, “R” or “L” by mistake.

• If driver’s or passenger’s knee hits the

gearshift lever while driving, the lever

could move and the gear could be

changed unexpectedly.

Use the gearshift lever positions as

described below:

P (Park)

Use this position to lock the transaxle

when the vehicle is parked or when start-

ing the engine. Shift into Park only when

the vehicle is completely stationary.

(2)

EXAMPLE

WARNING

Always depress the brake pedal

before shifting from “P” (Park) (or

“N” (Neutral) if the vehicle is station-

ary) to a forward or reverse gear, to

help prevent the vehicle from moving

unexpectedly when you shift.

(1)

EXAMPLE

Shift with the knob button (1)

pushed in and the brake pedal

depressed.

Shift with the knob button (1)

pushed in.

Shift without the knob button (1)

pushed in.

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды