MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 123 / 324

2-105
BEFORE DRIVING
68PH0-74E
mation display. Refer to “Information Dis-
play” in this section.
Lead to vehicle function
If the “UNLOCK” button of the remote con-
troller is pressed while the lighting switch is
positioned in the “AUTO”, the front position
lights and the headlights in the low beam
are turned on for 10, 15, 20, 25 or 30 sec-
onds.
The lead to vehicle function will operate
only when it is dark outside the vehicle.
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the remote con-
troller or request switch, or the key in the
driver’s door lock.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than the “AUTO” position.
NOTE:
• When the “lead to vehicle” is functioning,
the front fog lights and the headlights
(high beam) are not turned on.
• Lighting time of the “lead to vehicle func-
tion” can be changed on the information
display. Refer to “Information Display” in
this section.
Front Fog Light Switch
(If equipped)
68PH00256
To turn the front fog light on, twist the knob
as shown in the illustration with the posi-
tion lights, tail lights and/or the headlights
are on. When the front fog light is on, an
indicator light on the instrument cluster will
come on.
NOTE:
In some countries the lighting operation
may be different from the above descrip-
tion according to local regulations.
Headlight Leveling Switch
68PH00257
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart below shows the
appropriate switch position for different
vehicle-load conditions.
EXAMPLE
EXAMPLE