Установочное руководство к продукту Jegs 41535 доступно для загрузки бесплатно на нашем веб-сайте. Загрузите руководство и узнайте как установить и использовать данный продукт. Для загрузки посетите {веб-сайт}.
Installation Guide for 41535
Fuel Gauge Interface Module
73-10 Ohm Sender to 0-90 Ohm Gauge
Страница 1: ...Installation Guide for 41535 Fuel Gauge Interface Module 73 10 Ohm Sender to 0 90 Ohm Gauge ...
Страница 2: ...stions regarding the installation of this piece please contact our technical support department at 1 800 345 4545 Return Information Before modifying any of the wiring in this unit please trial fit all components Modified parts will not be accepted for return RED Connect to 12 volt ignition on wire so the module has power when the vehicle is on YELLOW Connect to fuel level sender output BROWN Conn...
Страница 3: ...k position Adjust the gauge pointer position to half by turning the calibration screw on the module When the pointer is calibrated press the H button one time middle button to save the gauge half position 4 Set the empty tank position Adjust the gauge pointer position to empty by turning the calibration screw on the module When the pointer is calibrated press the E button one time left button to s...
Страница 4: ...ton and turn the module power on Release the E button B To program the module to start at the set the POWER ON position Adjust the calibration screw to the position you would like the fuel level gauge pointer to be positioned when the car is started this is typically to the left of the gauge Empty position Press the E and F buttons simultaneously one time to save the POWER ON position Press and ho...