MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 201

Страница: 201 / 324

5-29

OTHER CONTROLS AND EQUIPMENT

68PH0-74E

You can use the air conditioning switch (6)

to manually turn the air conditioner on or off

according to your preference. When you

turn the air conditioning switch off, the cli-

mate control system cannot lower the

inside temperature below outside tempera-

ture.
To turn the climate control system off, push

the “OFF” switch (7).

NOTE:

If the “AUTO” on the display blinks, there is

a problem in the heating system and/or air

conditioning system. You should have the

system inspected by an authorised Maruti

Suzuki workshop.

NOTE:

• To find the temperature at which you are

most comfortable, start with the 25°C

(75°F) setting.

• If you turn the temperature selector (1)

until “HI” or “LO” appears on the display,

the climate control system will operate at

maximum heating or cooling and the

blower will run at full speed.

• To avoid blowing cold air in cold weather

or hot air in hot weather, the system will

delay turning on the blower until warmed

or chilled air is available.

• If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly.

• Even under the automatic operation, you

can set individual selectors to the man-

ual mode. The manually selected func-

tions are maintained, and the other

functions remain under automatic opera-

tion.

• If the windshield and/or the front door

windows are fogged, push the defrost

switch (5) to turn on the defroster, or

push the air flow selector (4) to change

the air flow to the “Heat & defrost” posi-

tion to defog the windows.

• To return the blower speed selector (2),

air intake selector (3), and air flow selec-

tor (4) to automatic operation, push the

“AUTO” switch (8).

68PH00558

Be careful not to cover the interior tem-

perature sensor (10) located between the

steering wheel and the climate control

panel, or the solar sensor (11) located at

the top of the driver’s side dashboard.

These sensors are used by the automatic

system to regulate temperature.

Manual operation

You can manually control the climate con-

trol system. Set the selectors to the

desired positions.

68PH00549

NOTE:

If you need maximum defrosting:

• push the defrost switch (5) to turn on the

defroster (The air conditioning system

will come on and the “FRESH AIR” mode

will be selected automatically),

• set the blower speed selector to HIGH,

• adjust the temperature selector to the

“HI” indication on the display, and

• adjust the side outlets so the air blows

on the side windows.

(10)

(11)

EXAMPLE

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды