MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 271 / 324

7-15
INSPECTION AND MAINTENANCE
68PH0-74E
Gear Oil
Manual Transaxle Oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart below.
We highly recommend you use:
“MARUTI GENUINE GEAR OIL 75W-80”
for manual transaxle gear oil.
Manual transaxle oil
68LM728
Gear Oil Level Check
68PH00712
(1) Oil filler and level plug
(For K12M model)
(2) Oil filler and level plug
(For K10C and D13A model)
To check the gear oil level, use the fol-
lowing procedure:
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler and level plug (1)
or (2).
3) If gear oil flows from the plug hole, the
oil level is correct. Reinstall the plug. If
gear oil does not flow from the plug
hole, add oil through the filler plug hole
until oil flows a little from the plug hole.
Tightening torque for oil filler and level
plug (1) or (2)
Manual transaxle:
21 Nm (2.1 kg-m, 15.5 lb-ft)
Gear Oil Change
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your authorised Maruti
Suzuki workshop.
C
F
o
o
-30
-22 -20
-4
-10
14 32 50 68 86 104
0 10 20 30 40
75W-80
C
F
o
o
-30
-22 -20
-4
-10
14 32 50 68 86 104
0 10 20 30 40
75W-80
EXAMPLE
(1)
(2)
EXAMPLE
CAUTION
After driving the vehicle, the gear oil
temperature may be high enough to
burn you. Wait until the oil filler is
cool enough to touch with your bare
hands before inspecting gear oil
level.
NOTICE
When tightening the plug, apply the
following sealing compound or
equivalent to the plug threads to pre-
vent oil leakage.
MARUTI SUZUKI Bond No. “1216E” or
“1217G”