MARUTI SUZUKI BALENO 2017, Руководство пользователя

Страница: 36 / 324

2-18
BEFORE DRIVING
68PH0-74E
4) Turn the knob on the lighting control
lever to the position and then turn
back to the OFF position. Repeat this
operation 4 times.
68PH00222
5) Push the lock end (4) (forward end) of
the central door locking switch (5), and
then push the unlock end (6) (backward
end). Repeat this operation 3 times.
Every time you perform the series of the
above steps, the state of the security sys-
tem changes from the currently selected
one to the other. You can check whether
the system is enabled or disabled by the
number of interior buzzer beeps at the end
of the procedure as follows.
• If you cannot complete the operations in
step 4) and 5) within 15 seconds cor-
rectly, the state of the security system
will not change and the interior buzzer
does not beep. Perform the procedure
again from the beginning.
NOTE:
You can also switch the security system
from the enabled state to the disabled
state, and vice versa, via the setting mode
of the information display. For details on
how to use the information display, refer to
“Information Display” in this section.
Theft Deterrent Light
(If equipped)
68PH00223
This light will blink with the ignition switch
in the “LOCK” or “ACC” position. The blink-
ing light is intended to deter theft by lead-
ing others to believe that the vehicle is
equipped with a security system.
(4)
(5)
(6)
EXAMPLE
3 times
System state Number of beeps
Disabled Once
Enabled 4 times
EXAMPLE