MARUTI SUZUKI BALENO 2017 Скачать руководство пользователя страница 113

Страница: 113 / 324

2-95

BEFORE DRIVING

68PH0-74E

Anti-Lock Brake System (ABS)

Warning Light

65D529

When the ignition switch is turned to the

“ON” position or the engine switch is

pressed to change the ignition mode to

“ON”, the light comes on briefly so you can

check that the light is working.

If the light stays on, or comes on when

driving, there may be something wrong

with the ABS.
If this happens:

1) Pull off the road and stop carefully.

2) Turn the ignition switch to “LOCK” or

change the ignition mode to “LOCK”

(OFF) by pressing the engine switch

and then start the engine again.

If the warning light comes on briefly then

turns off, the system is normal. If the warn-

ing light still stays on, the system will be

something wrong.

If the light and the brake system warning

light stay on, or come on simultaneously

when driving, your ABS system is

equipped with the rear brake force control

function (Proportioning valve function) and

there may be something wrong with both

the rear brake force control function and

anti-lock function of the ABS system.
If one of these happens, have the system

inspected by your authorised Maruti

Suzuki workshop.

If the ABS becomes inoperative, the brake

system will function as an ordinary brake

system that does not have this ABS sys-

tem.
For details of ABS system, refer to “Anti-

Lock Brake System (ABS)” in the “OPER-

ATING YOUR VEHICLE” section.

Oil Pressure Light

50G051

This light comes on when the ignition

switch is turned to the “ON” position or the

engine switch is pressed to change the

ignition mode to “ON”, and goes out when

the engine is started. The light will come

on and remain on if there is insufficient oil

pressure. If the light comes on when driv-

ing, pull off the road as soon as you can

and stop the engine.

Check the oil level and add oil if necessary.

If there is enough oil, the lubrication sys-

tem should be inspected by your autho-

rised Maruti Suzuki workshop before you

drive the vehicle again.

NOTICE

• If you operate the engine with this

light on, severe engine damage can

result.

• Do not rely on the oil pressure light

to indicate the need to add oil. Be

sure to periodically check the

engine oil level.

Содержание BALENO 2017





































































































































































































































































































































Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды

MARUTI SUZUKI BALENO 2017, Руководство пользователя

Результаты поиска

Содержание BALENO 2017

Отзывы:

Похожие инструкции для BALENO 2017

Бренды по названию

Популярные бренды