Lenovo BladeCenter HX5 1909, Руководство по диагностике и обслуживанию

Страница: 36 / 313

Step 6. Use IBM FastSetupIBM FastSetup is a no-cost software tool that helps simplify the maintenance
and deployment of selected IBM BladeCenter chassis, servers, and components. The intuitive
graphical interface initializes all phases of server setup, including discovery, update, and
configuration. Features include templates that enable replication of settings to many servers and
automation that reduces hands-on time and user errors. Wizards and other default settings enable
customization capabilities. The low-touch, set-once and walk-away feature reduces the hands-on
server setup time from days to minutes, particularly for larger deployments. For information about
this tool, see http://www.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=
TOOL-FASTSET.
Partitioning a scalable blade complex
Before you configure the blade servers that are part of a scalable blade complex operating in single partition
mode, you must partition the scalable blade complex.
For more information about scalable blade complexes and operating modes, see “Working with a scalable
blade complex” on page 16.
To partition a scalable blade complex, complete the following steps:
Step 1. From the advanced management module web interface, click Scalable Complex ➙
Configuration .
Step 2. Select one or more of the blade servers that are part of the complex.
Step 3. Click Available actions ➙ Create partition .
Using the Setup utility
Use these instructions to start the Setup utility.
To start the Setup utility, complete the following steps:
Step 1. Turn on the blade server (see “Turning on the blade server” on page 11).
Step 2. Immediately give the blade server control of the BladeCenter unit shared keyboard, video, and
mouse ports.
• If you are managing the blade server by using the BladeCenter system console, press the KVM
select button on the blade server (see “Blade server controls and LEDs” on page 7 for
information).
• If you are managing the blade server from a remote location, see the IBM BladeCenter Advanced
Management Module: User's Guide , IBM BladeCenter Advanced Management Module:
Command-Line Interface Reference Guide , or Serial over LAN Setup Guide for IBM BladeCenter
for information and instructions.
Step 3. When the prompt
Press <F1> Setup
is displayed, press F1. If you have set an administrator
password, you must type the administrator password to access the full Setup utility menu. If you do
not type the administrator password, a limited Setup utility menu is available.
Step 4. Follow the instructions on the screen.
The following menu items are on the Setup utility main menu. Depending on the version of the Unified
Extensible Firmware Interface (UEFI), some menu items might differ slightly from these descriptions.
• System Information
20
BladeCenter HX5 Blade ServerProblem Determination and Service Guide