the value after PID effect. See E09 for
E00.11
E00.10
E05(terminal function)
E00.09
E00.08
necessary to set E09. The running frequency of
DEC time means the time needed
ACC time means the time needed
initial value of reference frequency
Function Parameters
37
Function
code
Name
Description
Default
value
Modify
the detailed information of the preset source,
preset value, and feedback source of PID.
8: MODBUS communication setting
The frequency is set by MODBUS communication.
See P14 for detailed information.
9
–11: Reserved
B frequency
command
reference
0: Maximum output frequency, 100% of B
frequency setting corresponds to the maximum
output frequency
1: A frequency command, 100% of B frequency
setting corresponds to the maximum output
frequency. Select this setting if it needs to adjust
on the base of A frequency command.
0
○
Combination of
the setting
source
0: A, the current frequency setting is A frequency
command
1: B, the current frequency setting is B frequency
command
2: A+B, the current frequency setting is A
frequency c B frequency command
3: A-B, the current frequency setting is A
frequency command - B frequency command
4: Max (A, B): the bigger one between A frequency
command and B frequency is the set frequency.
5: Min (A, B): The lower one between A frequency
command and B frequency is the set frequency.
Note:
The combination manner can be shifted by
0
○
Keypad set
frequency
When A and B frequency commands are selected
as "keypad setting", this parameter will be the
Setting range: 0.00 Hz
(the max.
frequency)
50.00
Hz
○
ACC time 1
speeds up from 0Hz to the max. one (
speeds down from the max. output frequency to
0Hz (
Depend
on
model
○
