INVT 004G/5R5P-4, Руководство по эксплуатации, Страница: 89 / 178

2: Cycle running. will
finish a signal, will keep the running
op after running once. has to be
Function Parameters
85
Function
code
Name Description
Default
value
Modify
working and the integration will change with the
trend.
1: Stop integral adjustment when the frequency
achieves the upper and low limit. If the integration
keeps stable, and the trend between the reference
and the feedback changes, the integration will
change with the trend quickly.
LED tens: E00.08 is 0
0: The same with the setting direction; if the output
of PID adjustment is different from the current
running direction, the internal will output 0
forcedly.
1: Opposite to the setting direction
LED hundreds: E00.08 is 0
0: Limit to the maximum frequency
1: Limit to frequency A
LED thousands:
0: A+B frequency, the buffer of A frequency is
invalid
1: A+B frequency, the buffer of A frequency is
valid
ACC/DEC is determined by ACC time 4 of E08.04 .
E09.14
Proportional
gain at low
frequency (Kp)
0.00
–100.00
1.00
○
E09.15
PID command
of ACC/DEC
time
0.0
–1000.0s
0.0s
○
E09.16
PID output filter
time
0.000
–10.000s
0.000s
○
E10 Group Simple PLC and multi-step speed control
E10.00 Simple PLC
0: St
commanded again after finishing a cycle.
1: Run at the final value after running once. After
frequency and direction of the last run.
keep on running
until receiving a stop command and then, the
system will stop.
0
○