ow to modify the function codes
perate via operation panel.
Keypad Operation Procedure
30
5.3
Keypad displaying
5.4
Keypad operation
O
See the detailed structure description
of function codes in
the
brief diagram of function codes.
5.4.1
H
has three levels menu, which are:
1. Group
number of function code (first-level menu)
2. Tab
of function code (second-level menu)
3. Set value of function code (third-level menu)
Remarks: Press both the PRG/ESC
and the DATA/ENT
can return to the second-level
menu from
the third-level
menu. The difference is: pressing DATA/ENT
will save the set parameters into the
The display status of the keyboard is divided into shutdown status parameter display, operation
status parameter display, function code parameter editing status display, fault alarm status
display, etc.
control panel, and then return to the second-level menu with shifting to the next function code
automatically; while pressing PRG/ESC will directly return to the second-level menu without saving
the parameters, and keep staying at the current function code.
Under the third-level menu, if the parameter has no flickering bit, it means the function code cannot
be modified. The possible reasons could be:
1) This function code is not modifiable parameter, such as actual detected parameter, operation
records and so on;
2) This function code is not modifiable in running state, but modifiable in stop state.
Example: Set function code E00.01 from 0 to 1.
