local address (only for the motor parameter of E02
E02 group)
Function Parameters
68
Function
code
Name
Description
Default
value
Modify
the user check or modify the parameters. Please
remember all users’ passwords.
Retreat editing state of the function codes and the
password protection will become valid in 1 minute.
If the password is available, press PRG/ESC to
enter into the editing state of the function codes,
and then "0.0.0.0.0" will be displayed. Unless input
right password, the operator cannot enter into it.
Note:
Restoring to the default value can clear the
password, please use it with caution.
E07.01
Parameter
copy
The function code determines the mode of
parameters copy.
0: No operation
1: Upload the local function parameter to the
keypad
2: Download the keypad function parameter to
local address(including the motor parameters)
3: Download the keypad function parameter to
local address (excluding the motor parameter of
4: Download the keypad function parameters to
group)
Note:
After completing the 1
–4 operations, the
parameter will come back to 0 automatically, the
function of upload and download excludes the
factory parameters of E29.
0
◎
E07.02
function
selection
Ones: Function of QUICK/JOG key
0: No function
1: Jogging. Press
to begin the
jogging running.
2: Shift the display state by the shifting key. Press
to shift the displayed function code
from right to left.
3: Shift between forward rotations and reverse
rotations. Press
to shift the direction
of the frequency commands. This function is only
valid in the keypad commands channels.
4: Clear UP/DOWN settings. Press
to clear the set value of UP/DOWN.
0x01
◎
ME.K
ME.K
ME.K
ME.K
ME.K
