=6. Set E05 to select the
ode of process PID
The runs at multi
runs at simple PLC program mode when
terminals. provide 1
Function Parameters
36
Function
code
Name
Description
Default
value
Modify
Note:
When analog AI1/AI2 selects 0
–20mA input,
the corresponding voltage of 20mA is 10V.
100.0% of the analog input setting corresponds to
the maximum frequency (function code
) in
forward direction and -100.0% corresponds to the
maximum frequency in reverse direction
(function code
4: High-speed pulse HDI setting
The frequency is set by high-speed pulse
channel high speed pulse input as the standard
configuration. The pulse frequency range is
0.00
–50.00kHz.
100.0% of the high speed pulse input setting
corresponds to the maximum frequency in forward
direction (
) and -100.0% corresponds to the
maximum frequency in reverse direction (
Note:
The pulse setting can only be input by
multi-function terminals HDI. Set
input selection) to high speed pulse input.
5: Simple PLC program setting
=5. Set P10 (simple PLC and
multi-step speed control) to select the running
frequency, running direction, ACC/DEC time and
the keeping time of corresponding step. See the
function description of P10 for detailed
information.
6: Multi-step speed running setting
-step speed mode when
=6. Set E05 to select the
current running step, and set P10 to select the
current running frequency.
The multi-step speed has the priority when
does not equal to 6, but the setting step
can only be the 1
–15 steps. The setting step is
0
–15 if
7: PID control setting
The running m
control when
=7. It is
