manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 696 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 696

2:448

Volume 2, Part 1: Processor Abstraction Layer

PAL_PROC_GET_FEATURES

54

Opt.

Req.

No

Enable the use of the vmsw instruction. When 0, the 

vmsw

 instruction 

causes a Virtualization fault when executed at the most privileged level. 
When 1, this bit will enable normal operation of the 

vmsw

 instruction. This bit 

has no effect if virtual machine features are disabled (see bit 40).

53

Opt.

Req.

May

Enable MCA signaling on unconsumed data-poisoning event detection. 
When 0, a CMCI will be signaled on error detection. When 1, an MCA will be 
signaled on error detection. Note that the reported error severity depends on 
which method is chosen for signaling; see 

Section 11.3.2.3, “Unconsumed 

Data-Poisoning Event Handling”

 for details.If this feature is not supported, 

then the corresponding argument is ignored when calling 
PAL_PROC_SET_FEATURES. Note that the functionality of this bit is 
independent of the setting in bit 60 (Enable CMCI promotion), and that the 
bit 60 setting does not affect CMCI signaling for data-poisoning related 
events.

52

Opt.

Req.

May

Disable P-states. Provides the ability to disable p-states when they are 
implemented by the processor. When the feature is available and status is 1 
or when the feature is not available, the PAL P-state procedures 
(PAL_PSTATE_INFO, PAL_SET_PSTATE, PAL_GET_PSTATE) will return 
with a status of -1 (Unimplemented procedure). When the feature is 
available and the status is 0, the PAL P-state procedures will operate 
normally.

51:48 N/A

N/A

N/A

Reserved

47

Opt.

Opt.

May

Disable Dynamic branch prediction. When 0, the processor may predict 
branch targets and speculatively execute, but may not commit results. When 
1, the processor must wait until branch targets are known to execute.

46

Opt

Opt.

May

Disable Dynamic Instruction Cache Prefetch. When 0, the processor may 
prefetch into the caches any instruction which has not been executed, but 
whose execution is likely. When 1, instructions may not be fetched until 
needed or hinted for execution. (Prefetch for a hinted branch is allowed even 
when dynamic instruction cache prefetch is disabled.)

45

Opt.

Opt.

May

Disable Dynamic Data Cache Prefetch. When 0, the processor may prefetch 
into the caches any data which has not been accessed by instruction 
execution, but which is likely to be accessed. When 1, no data may be 
fetched until it is needed for instruction execution or is fetched by an lfetch 
instruction.

44

Opt.

Req.

No

Disable Spontaneous Deferral. When 1, the processor may optionally defer 
speculative loads that do not encounter any exception conditions, but that 
trigger other implementation-dependent conditions (e.g., cache miss). This 
behavior is gated by the programming model described in 

Section 5.5.5, 

“Deferral of Speculative Load Faults” on page 2:105

. When 0, spontaneous 

deferral is disabled.

43

Opt.

Opt.

No

Disable Dynamic Predicate Prediction. When 0, the processor may predict 
predicate results and execute speculatively, but may not commit results until 
the actual predicates are known. When 1, the processor shall not execute 
predicated instructions until the actual predicates are known.

42

Opt.

No

RO

c

XR1 through XR3 implemented. Denotes whether XR1 - XR3 are 
implemented for machine check recovery. This feature may only be 
interrogated by PAL_PROC_GET_FEATURES. It may not be enabled or 
disabled by PAL_PROC_SET_FEATURES. The corresponding argument is 
ignored.

41

Opt.

No

RO

XIP, XPSR, and XFS implemented. Denotes whether XIP, XPSR, and XFS 
are implemented for machine check recovery. This feature may only be 
interrogated by PAL_PROC_GET_FEATURES. It may not be enabled or 
disabled by PAL_PROC_SET_FEATURES. The corresponding argument is 
ignored.

Table 11-112. Processor Features (Continued)

Bit

Class Control Scope

Description

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов