manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 550 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 550

2:302

Volume 2, Part 1: Processor Abstraction Layer

After return from the SAL rendezvous call, PALE_CHECK will complete processing the 
machine check if the rendezvous was successful and then branch to SALE_ENTRY with 
GR19 set to zero. The processor state when transferring to SAL is as defined in 

Section 11.3.2, “PALE_CHECK Exit State” on page 2:297

. If the rendezvous failed 

PALE_CHECK will simply construct the Processor State Parameter and branch to 
SALE_ENTRY.

Any further discussion of multiprocessor rendezvous, including platform requirements 
and implications, is beyond the scope of this specification. See the relevant SAL/Error 
handling documents for further information.

11.3.2.3

Unconsumed Data-Poisoning Event Handling

If, during the transfer/access of information between levels of the cache/memory 
hierarchy, there is data found to have an uncorrectable error and is marked poison, 
error reporting events may be raised. If such an error event is sent to a processor that 
doesn't consume the corrupted data, then the error is termed an 

unconsumed 

data-poisoning event

.

Unconsumed data-poisoning events are by default reported as a CMC and can 
optionally be promoted to an MCA via bit 53 of 

feature_set

 0 of 

PAL_PROC_SET_FEATURES. When they are signaled as a CMC the PSP.cm is set to 1 to 
indicate that the error has been corrected (in the sense that the line has been marked 
poison, preventing any silent data corruption).

If bit 53 is 1, unconsumed data-poisoning events are reported as MCAs. To immediately 
report unconsumed data-poisoning events as 

uncorrected errors

 (in the sense that 

the data in question has been lost), the caller can set bit 53 to 1. PSP settings for a 
data-poisoning event with bit 53 equal to 1 are given in the table below. See also 

Table 11-8

.

When promotion is enabled (bit 53 is 1), and a continuable data-poisoning event is 
indicated (i.e., the PSP bits are set as in the above table, and either cache_check.dp, 
bus_check.dp or both are 1), and if no other MCAs occur at the same time (i.e., no 
other errors are indicated in the error information from PAL_MC_ERROR_INFO), the 
interrupted process is always continuable. Promotion to MCA with bit 53 allows the OS 
to take proactive measures to recover from the poisoned data, but this is not required 
for the interrupted process to be continuable.

11.3.2.4

Processor Min-state Save Area Layout

The processor min-state save area is minimally 4KB in size, but an implementation may 
require larger sizes. The reset hand-off state indicates if a size greater than 4KB is 
required and also provides the required size. Please refer to 

Section 11.2.2.1, 

“Definition of SALE_ENTRY State Parameter” on page 2:291

 for more information on 

the reset hand-off state. The required size is referred to as MIN_STATE_REQ. The 
min-state save area is required to be in an uncacheable region. The first 1KB of this 

Table 11-9.

PSP Bit Settings for Unconsumed Data-poisoning Events on 

MCA

cm

us

ci

co

sy

0

0

1

1

0

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов