Endress+Hauser TopClean S CPC 30, Руководство по эксплуатации

Страница: 37 / 146

TopClean S CPC 30 6 Commissioning
Hauser 37
Linear : The characteristic curve is linear from the lower to the upper value.
Table : When you do not want the current output characteristic to be linear, you can enter a customer-specific sequence of up to 10 value pairs
in a table. Exact adaptation to the non-linear medium behaviour can achieve a higher level of accuracy.
Linear:
EAA1 0/4 mA: 02.00 pH
/ 000.0 °C / -0500 mV
20 mA: 12.00 pH
/ 100.0 °C / 0500 mV
Entry of the upper and lower measured value limits
The maximum range of the measured value is
–2 ... +16 pH.
The minimum distance from the upper to the lower
measured value limit is 2 pH units.
(Example.: 0/4 mA: pH 7 and 20 mA: pH 9)
E2
EAA6 Linear characteristic curve
active. Note in display:
The linear characteristic curve is activated after
confirmation by pressing "E". Cancel by pressing
"PARAM".
–
Table:
Note on table entry:
Enter the number of support points (value pairs) in Field EAB1.
Enter the value pairs in Field EAB2.
Example (4 support points):
Fig. 20: Example of characteristic curve entry using a table
mA
0004
0008
0016
0020 pH
02.00
06.00
08.00
12.00
EAB1 02
(2 ... 10)
Entry of the number of support points (value pairs) E2
EAB2 pH/Redox/°C/: 000.0
mA: 04.00
Entry of the value pairs
pH/Redox/°C - mA (number of required value pairs =
number of support points desired in Field EAB1).
E2
EAB3 OK
Delete element(s)
Selection:
Are the value pairs OK or do you want to delete
elements?
E1
EAB4 pH/Redox/°C/: 000.0
mA: 04.00
Delete:
Select the rows to be deleted, delete them with
T
and
confirm this with "E".
E2
EAB5 Valid table Note in display (no entry)
Table status. If invalid, then back to EAB4.
–
EAB6 Table active Note in display:
The table is active after confirmation by pressing "E".
Cancel by pressing "PARAM".
–
CODE CHOICE
(default = bold) INFO
(E1, 2 = Editor types, s. page 28)
User
settings
8
4
2 6 8 12
20
mA
16
pH
C07-CPM153xx-05-06-00-xx-002.EPS