Endress+Hauser TopClean S CPC 30, Руководство по эксплуатации

Страница: 115 / 146

TopClean S CPC 30 9 Accessories
Hauser 115
9 Accessories
Offline configuration The PC tool provides you with a tool for configuring your measuring point at the PC using
a simple and self-explanatory menu structure. Write the configuration to the DAT module
using the RS232 interface on the PC. The module can then be plugged into the
transmitter. You can switch the language via software. The offline configuration system
consists of a DAT module, a DAT interface (RS 232) and the software for Windows
NT/95/98/2000. Order No.:
51507563
DAT module The DAT module is a memory device (EEPROM) which can be easily plugged into the
connection compartment of the transmitter. Using the DAT module you can
• save
the complete settings, the logbooks and the data logger of a transmitter and
• copy
the complete settings to other CPM 153 transmitters with identical hardware
functionality.
This considerably reduces the effort to install or service several measuring points. Order
No.: 51507175
Assemblies
pH/redox electrodes
Service adapter
Optoscope The service adapter aids communication between Hauser transmitters and
the PC using the service interface. You can use it to load new firmware and to save/write
customer data (using a PC with the Windows 95/98 or Windows NT operating system).
Terminated
pH measuring cable
• CPK 1
: Version with pilot wire and additional outer screening, sheathed in PVC, dia.
7.2 mm. Extension with cable CYK 71 possible, see table "Measuring cable as yard
goods".
• CPK 7
: Version as coaxial cable with four pilot wires and additional outer screening,
sheathed in PVC, dia. 7.2 mm. Extension with cable CYK 71 possible, see table
"Measuring cable as yard goods".
• CPK 9
: For pH/redox electrodes with integrated temperature sensor and TOP68
plug-in head (version ESA, ESS). Extension with cable CYK 71 possible, see table
"Measuring cable as yard goods".
Type Properties Applications
CleanFit
CPA 471/
472/ 475
Retractable assembly for manual or pneumatic
operation. Cleaning and calibrating the electrode is
possible under process conditions.
CPA 475: 3A approval, application pending with
EHEDG. • Process systems in general
(471, 472)
• Food, pharmaceutical
applications (475)
• Biotechnology (475)
Type Properties Applications
OrbiSint W
CPS 11/12/13
Universally applicable, very easy to clean and
insensitive to soiling due to PTFE diaphragm, pressures
up to 6 bar, conductivity > 50 µS/cm • General process engineering
• Industrial wastewater
• Detoxification (cyanide,
chrome)
• Neutralisation
CeraLiquid P
CPS 41/42/43
Electrodes with ceramic diaphragms and KCl liquid
electrolyte, use with counterpressure, explosion-proof up
to 8 bar • General process engineering
• Ultra-pure water
• Boiler feed water
• Detoxification (cyanide)
CeraGel P
CPS 71
Gel electrode with double-chamber reference system.
Long-term stability, short response time, very long toxic
path, resistant to alternating temperature and pressure
cycles • General process engineering
• Food processing
• Water treatment
TopHit H
CPS 401
Rupture-proof pH sensor based on IsFET technology.
Short response time, very high resistance to alternating
temperature cycles, sterilisable, almost no acid or
alkaline errors • General process engineering
• Food, pharmaceutical
applications
• Water treatment
• Biotechnology