Endress+Hauser TopClean S CPC 30, Руководство по эксплуатации

Страница: 48 / 146

6 Commissioning TopClean S CPC 30
48 EHauser
The data logger records two freely selectable parameters with their date and time. You
can start it using the measuring menus:
Use the arrow keys to scroll through the measuring menus until to you reach the Record
mode of the data logger. Pressing the "Enter" key brings you to the Scroll mode of the
data logger. Here you can open the saved measured values with their date and time.
PARAM
⇒
Set up 2
⇒
Data logger
CODE CHOICE
(default = bold) INFO
(E1, 2 = Editor types, s. page 28)
User
settings
K1 Measuring interval
Data logger 1
Data logger 2
Data logger settings
Using the data logger you can record
• Record a parameter with 500 sequential measuring
points or
• two parameters each with 250 sequential measuring
points.
E1
Measuring interval:
KA1 00005 s
(2 ... 36000 s)
Enter measuring interval
Enter the time interval after which the next measured
value is recorded in the data logger.
E2
Data logger 1 (or 2):
KB1 / KC1 Measured
value:
Function: pH/redox
on
Selection
Set the measured variable for recording (pH/redox ,
temp.) and the activate using the "on" function.
!
Note!
The data logger starts recording the measured value
when you return to measuring mode.
E2
KB2 / KC2 Min:
Max: –2.00
16.00 Set recording range
Values outside the defined range are not recorded.
E2