Endress+Hauser TopClean S CPC 30, Руководство по эксплуатации

Страница: 134 / 146

11 Appendix TopClean S CPC 30
134 EHauser
DIAG
List and status of
last 20
calibrations
C07-CPC30xxx-19-06-08-en-012.EPS
Select
Factory settings
Simulation
Instrument check
DAT download
Set up 2
(Internal data,
ChemoClean, TopClean,
Factory function
see below)
Test result:
RAM / EEPROM /
Flash OK
Set to default
values:
Cancel
only setting data
only calibration data
all data; .....
Select test
functions
Display
RAM
EEPROM
Flash
With service data:
Enter
service code
(necessary)
Info field if incorrect
service code
entered:
--> return to Enter
Simulation
Sim.status off
Meas.value K1 07.00pH
Temperature T1 25.0°C
Simulation
Sim.status off
Failure contact off
Contact 1 off
up to contact 5 off
Simulation
Simulation status off
Curr.output 1 22.00 mA
Curr.output 2 00.00mA
Note!
After selection of
"Reset" a
warm start directly
will be made.
Select
Error list
Error log
Operation log
Calibration log
Service
List of current
error messages
List of last
20 operations
List of errors
entered in
error log
»Return field«:
press the PARAM
key to return to
the highlighted
fields.
= Code entry required
Back to
return field
Back to
return field
Back to
return field
Info field
No DAT module
connected!
Info field before
saving into DAT:
The data on the DAT
module will be
overwritten!
Select DAT
DAT write
DAT read
Log/Data log to DAT
DAT to CPC
CPC to DAT