Dynon Avionics SkyView SV-D1000 Скачать руководство пользователя | Manualshive

Страница: 70 / 154

background image

SV-MAP-270 Navigation Mapping Software

7-2

SkyView Pilot’s User Guide - Revision M

If Navigation Mapping Software is not available, then either the system is not licensed or there
is no valid aviation database in the system. To determine which of these is the case, check the
status of the license in the Setup Menu under SETUP MENU > LOCAL DISPLAY SETUP > LICENSE.
See the SkyView Installation Guide for more details about using Setup to check licenses.

In some cases, SkyView may display one of the following messages when the Map Page is first
displayed after boot:



LICENSED DISPLAY OFFLINE - XX HOURS REMAIN: The system is licensed, but the display
that actually stores the license is not currently connected. If the display that stores the
license is not returned to the system when this countdown expires, the display will
revert to an unlicensed state. This feature is intended to allow the map to continue to
function in the event that the display that stores the license fails or is out of the airplane
for repair.



MAP TRIAL MODE - XX HOURS REMAIN: The system is not licensed, but the Navigation
Mapping Software is in its 30 free flight hour introductory trial period. At the end of this
period, the map will cease to function until a license is purchased. Note that this timer is
only checked on boot. If it expires during a flight, the Navigation Mapping Software will
remain available for the remainder of that flight.

Features Overview

Once licensed, the following features are enabled as long as SkyView has the appropriate high
resolution terrain database installed for the region of the world that you are flying in, and an
aviation database installed.



Use of MAP menu and features, including:

o

Display of airport, airspace, obstacles, traffic, and other aviation data that is
available (capabilities depend on available databases and other installed
equipment).

o

Display of basemap features, including roads, city names, railroads, rivers, and
political boundaries.

o

All Navigation Mapping Software features available via the MAP menu.

o

Display of obstacles and runways on Synthetic Vision (if Synthetic Vision is
licensed).

o

All future updates to the SV-MAP-270 Navigation Mapping Software product
(databases may incur additional costs).

Purchasing and Installing a Navigation Mapping Software License

A license can be purchased in one of two ways:

1.

Call Dynon Avionics directly at 425-402-0433 with your SkyView display model (SV-D100
or SV-D700) and serial number (as displayed on the case sticker, or in SETUP MENU >
LOCAL DISPLAY SETUP > DISPLAY HARDWARE INFORMATION). An SV-MAP-270
Navigation Mapping Software License Code can be purchased for the entire aircraft you
wish to enable the Navigation Mapping Software on. This six character License Code is

«
...
68
69
70
71
72
...
»

Содержание SkyView SV-D1000



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SkyView SV-D1000

Бренд: Barco Страницы: 2

Бренд: Nordcap Страницы: 14

Бренд: FrSky Страницы: 17

Бренд: Winco Страницы: 8

Finesta SC 2127

Бренд: Modena Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды