SV-MAP-270 Navigation Mapping Software
7-32
SkyView Pilot’s User Guide - Revision M
Figure 85 - Map/HSI with Navigation Active
Clearing the Active Waypoint
Press
when it is highlighted to bring up the current waypoint information. From the
resulting menu, press STOP
to clear the active waypoint and cancel navigation.
If a waypoint is selected in any window that waypoints can be selected in, pressing
will immediately replace your current
destination with the selected
destination.
If you previously had an active Flight Plan loaded that was deactivated by the use of the
feature it will be reloaded (but will not be activated).
Alternatively, if you had a flight plan that was previously suspended through the use of the
feature, you can use FPL > RSM FLP to resume flight plan to reactivate that flight plan and
cancel the
operation.
Map Panning with the Map Pointer
Move the (MAP) joystick up, down, left or right, or in any diagonal direction to cause the map
to follow your joystick movement instead of following the aircraft’s movement. When in this
Map Panning Mode, the Map Page does not auto-center on the airplane, but on the Map
Pointer instead. Turning the joystick causes the map to zoom in and zoom out around the Map
Pointer, just like it does when it is following the aircraft.