Dynon Avionics SkyView SV-D1000 Скачать руководство пользователя

Страница: 7 / 154

SkyView Pilot’s User Guide - Revision M

vii

Revision

Revision Date

Description

March 2012

Clarified that Jeppesen data must be transferred to USB stick via the Jeppesen JSUM
program.

Added PocketFMS information.

Clarified bearing sources and limitations (SBY bearings from some NAV radios and no
availability of bearings from LOCs).

Clarified EMS timers.

Added special Rotax 912 tachometer and oil temp behavior when configured.

Added altitude alerter information.

Refreshed Messages and Alerts section to reflect feature improvements.

Added Audio Alert information.

Updated map instructions to reflect UI refresh, improved info items support, user
waypoints, and visual reporting points support.

July 2012

Clarified engaging the Autopilot with the Disengage/CWS Button.

Added information about when airspeed indication comes alive.

Added SkyView Network redundancy information.

Added ADAHRS cross-checking information.

Updated Navigation Mapping Software to incorporate base map support and airspace
improvements.

December 2012

Updated Screen Layout Configuration section to add information about display swap
mode and reversion mode.

Added information about DA calculation.

Added engine alert inhibit information.

Added information about normal display artifacts on power on.

Updated recommendation to have servos powered whenever SkyView is powered on.

Added description of take-off position marking for trim widget.

Added information about attitude rate limit indications.

Rearranged PFD Operation section for better information flow.

Added SV-XPNDR-26X, SV-ADSB-470 information to system overview.

Added ADS-B and Flarm traffic information.

User waypoint altitude information now displayed on their Info pages.

Added information about the AUTO transponder setting when automatic ALT/GND mode
changes are enabled (only available with transponder software version 2.02 or above).

Detailed improvements to ENGINE > FUEL UI.

Added information about weather features and usage via SV-ADSB-470.

January 2013

Added information about Data Logging

Added information about Stadium TFRs

Added TACAN and Outer Marker symbols

Clarified information about the AIRSPACES BELOW feature in the Map Menu

Table 1–SkyView Pilot's User Guide Revision History

Содержание SkyView SV-D1000



























































































































































Результаты поиска

Содержание SkyView SV-D1000

Отзывы:

Похожие инструкции для SkyView SV-D1000

Бренды по названию

Популярные бренды

Dynon Avionics SkyView SV-D1000, Руководство пользователя

Результаты поиска

Содержание SkyView SV-D1000

Отзывы:

Похожие инструкции для SkyView SV-D1000

Бренды по названию

Популярные бренды