Dynon Avionics SkyView SV-D1000 Скачать руководство пользователя | Manualshive

Страница: 36 / 154

background image

PFD Operation

4-8

SkyView Pilot’s User Guide - Revision M

Altitude Bug

The altitude bug is displayed in cyan on the altitude tape and its associated digital readout is
displayed at the top of the altimeter.

The altitude bug is used as a target for the pitch axis of the

SkyView Autopilot when a pitch axis servo is installed.

The reaction of the autopilot to an altitude bug change depends on the state of the pitch axis,
its armed mode of operation, and the current state of the aircraft. Reference the Autopilot
Operation Section for more information.

To set the altitude bug:

1.

Enter the Joystick Function Menu.

2.

Move the joystick up or down to highlight (ALT).

3.

Move the joystick left or right to close the menu (this is optional).

(ALT) will now display just above that joystick. The altitude bug setting on the PFD will be
outlined to signal that it is selected. Turn the joystick to adjust the altitude bug. Note that while
the altitude bug is changing, its display window lights up in cyan to draw your attention to it.

You can synchronize the altitude bug with the current altitude by pressing and holding the ALT
joystick to the left or right for 2 seconds.

If the autopilot is engaged and the altitude bug is changed to more than 100 feet away from the
current altitude, the autopilot enters vertical speed mode and the text in the Top Bar changes
to VS



ALT to indicate this new mode.

Reference the Autopilot Operation Chapter for more information regarding autopilot
functionality, symbology, and operation information.

Altitude Alerter

SkyView can be configured to audibly alert as the aircraft changes altitude in relation to the
altitude bug. When the bug is active, audio out is configured, and the altitude alerter is
configured, SkyView announces “APPROACHING ALTITUDE” as the aircraft flies within a chosen
amount of feet/meters of the bug. SkyView announces “LEAVING ALTITUDE” as the aircraft flies
away from the altitude bug by more than a chosen amount of feet/meters. The altitude
thresholds that trigger the two above alerts are individually configurable, and the altitude
alerter will work whether or not the autopilot is engaged. See the SkyView Installation Guide
for details on how to configure the altitude alerter.

«
...
34
35
36
37
38
...
»

Содержание SkyView SV-D1000



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SkyView SV-D1000

Бренд: Igloo Страницы: 56

Falcon 2000EX EASy

Бренд: DASSAULT AVIATION Страницы: 40

Бренд: Gold Medal Страницы: 10

Бренд: Maxima Страницы: 13

Бренд: Avidyne Страницы: 200

Бренд: Barco Страницы: 2

Бренд: DOCRILUC Страницы: 43

Бренд: Barco Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды